Fiberglass Tape

• Application
• Mostly used in construction applications, these include reinforcing wall cracks, board cracks, plasterboard cracks and marble cement, in addition to repairing drywall joints.

• Color
• Any color

• Length
• 20 - 500 Meter (m)

• Material
• Filament fiberglass yarn coated with acrylic acid copolymer liquid

• Product Type
• WFMT

• Size
• Mesh size: 2.85 x 2.85mm (9 x 9 mesh) and other mesh sizes are available

• Surface Treatment
• With a self adhesive layer by request

• Weight
• 60 - 200 GSM (gm/2)

• Width
• 50-1500 Millimeter (mm)

• Application
• Fiberglass scrim tape can be applied as reinforcements for GRP moulds, high strength requirements, small GRP components, pultrusion tapes with feathered edge for tube manufacture e.g. boat building, prevention and repair of reflective cracking on highways, wind turbine blade construction and pattern making.

• Length
• 30, 50 Meter (m)

• Material
• A special type of glass yarn which is resistant to oils, solvents and most chemicals and has tensile strength.

• Product Type
• WFT5

• Size
• Thickness 0.1mm - 0.4mm

• Technique
• Woven using a special type of glass yarn which is resistant to oils, solvents and most chemicals and has tensile strength

• Weight
• 100 - 400 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass yarns and PSA

• Product Type
• WFT1B

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Texturized fiberglass tape with PSA on one side.

• Technique
• Constructed from texturized fiberglass tape with PSA (pressure sensitive adhesive) on one side.

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Automotive Manifold, Header, Turbo & Exhaust Pipe Tape & Wrap

• Color
• Black, blue, yellow, red, green

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass

• Product Type
• WFT1D

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• With certain pigment treatment

• Technique
• Constructed from a high temperature base fiberglass tape with certain pigment treatment to get colorful decoration wrap around exhaust pipe.

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Used as a gasket or seal on boiler, coke oven, industrial oven and wood stove/pellet stove doors.

• Color
• Black

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass

• Product Type
• WFT1GB

• Size
• Thickness 1mm - 2mm

• Surface Treatment
• Graphite coated in black color

• Technique
• Narrow fiberglass tape with graphite coating

• Usage
• Increase the temperature resistant up to 750C, short time resist to 1000C

• Weight
• 800 - 1300 GSM (gm/2)

• Width
• 15 - 25 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Color
• Black, blue, yellow, red, green

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass yarns

• Product Type
• WFT1C

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Some warp yarns dyed with certain pigment to give outstanding color mark.

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass yarns

• Product Type
• WFT2

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Available with specialty coatings such as Aluminium foil, Adhesive back, Dyeing, Graphite, Heat treatment, Silicone rubber, Vermiculite, etc.

• Technique
• Produced of bulk texturized fiberglass yarns, traps greater amounts of air and demonstrates better insulation properties and greater fullness.

• Usage
• Used at 1000 degree F / 537 degree C continuous.

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• An excellent choice for the protection of industrial wires, cables, hoses (hydraulics), pipes, tubing and equipment that is in close proximity to heat sources.

• Length
• 30, 50 Meter (m)

• Material
• Aluminized fiberglass cloth.Self adhesive back

• Product Type
• WFT6AB

• Size
• Thickness 0.2mm

• Surface Treatment
• One side coated with Aluminum foil, the other side coated with Self adhesive.

• Technique
• Constructed from slitting a high temperature base fiberglass cloth which is coated with highly reflective polished aluminum foil on one side and with adhesive back on other side.

• Usage
• It can withstand short exposure to the higher temperatures.Excellent radiant heat protection from sources such as super-hot metal slabs, proximity to liquid metal, infrared heaters, or engine exhaust manifolds is a concern.

• Weight
• 200 GSM (gm/2)

• Width
• 25 - 200 Millimeter (mm)

• Application
• Automotive Manifold, Header, Turbo & Exhaust Pipe Tape & Wrap

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass

• Product Type
• WFT1H

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Heat treatment

• Technique
• Constructed from a high temperature base fiberglass tape with heat treatment to clean the sizing and organic content.

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass yarns

• Product Type
• WFT1

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Available with specialty coatings such as Aluminium foil, Adhesive back, Dyeing, Graphite, Heat treatment, Silicone rubber, Vermiculite, etc.

• Technique
• Produced of bulk texturized fiberglass yarns, traps greater amounts of air and demonstrates better insulation properties and greater fullness.

• Usage
• Used at 1000 degree F / 537 degree C continuous.

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Used to bind the coils of electrical machinery, electrical applications and transformers.

• Length
• 30,50 Meter (m)

• Material
• E-Glass filament yarns

• Product Type
• WFT3

• Size
• Thickness 0.1mm - 0.4mm

• Technique
• Electrical insulation grade fiberglass

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 100 - 400 GSM (gm/2)

• Width
• 10- 150 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Length
• 30,50 Meter (m)

• Material
• Aluminium foil laminated.Texturized fiberglass tape

• Product Type
• WFT1A

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• One side coated with Aluminum foil

• Technique
• Constructed from a high temperature base fiberglass tape which is then coated with highly reflective polished aluminum foil.

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Thermal insulation and heat protection pipes, flexible tubes, electrical cables, sealing joints of ovens and boiler doors, stoves, fireplaces and expansion joints.

• Length
• 30,50 Meter (m)

• Material
• Texturized fiberglass yar

• Product Type
• WFT4

• Size
• Thickness 3mm

• Technique
• Knitted

• Usage
• Used at 1000F / 537C continuous

• Width
• 15 - 50 Millimeter (mm)

• Application
• Band the rockwool pipes in ship, bank the electrical cables, etc.

• Length
• 30, 50 Meter (m)

• Material
• Slit from fiberglass cloth.Self adhesive back

• Product Type
• WFT6

• Size
• Thickness 0.2mm, 0.3mm

• Usage
• Used at 1000 degree F / 537 degree C continuous

• Weight
• 110, 200 GSM (gm/2)

• Width
• 25 - 200 Millimeter (mm)

• Application
• Automotive Manifold, Header, Turbo & Exhaust Pipe Tape & Wrap

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglas

• Product Type
• WFT1V

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Vermiculite coating Texturized fiberglass

• Technique
• Constructed from a high temperature base fiberglass tape with vermiculite coating and heat treatment to clean the sizing and organic content.

• Usage
• Used at 750 degree C continuous, short time in 1000 degree C

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)

• Application
• Automotive Manifold, Header, Turbo & Exhaust Pipe Tape & Wrap

• Color
• Black

• Length
• 30, 50 Meter (m)

• Material
• Texturized fiberglass

• Product Type
• WFT1G

• Size
• Thickness 0.8mm - 6mm

• Surface Treatment
• Graphite coated in black color

• Technique
• Constructed from a high temperature base fiberglass tape with graphite coating and heat treatment to clean the sizing and organic content.

• Usage
• Used at 750 degree C continuous, short time in 1000 degree C

• Weight
• 600 - 4500 GSM (gm/2)

• Width
• 15 - 200 Millimeter (mm)